Combined QDID(s): [ B017039    ]

Layers   Core PICS   Profile PICS  
QDID:B017941
Product Name:BlueModule Type79
Product Type:Component (Tested)
TPG Version:Core 4.0 TCRL-2010-2
Specification Name:4.0 (Spec Version)
Product Description:
class1 module


  Summary ICS  
  External to all Layers  



Controller Core Specification   [ top ]

Table 21: Controller Core Specification
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
(Intentionally left blank)        
(Intentionally left blank)        
(Intentionally left blank)        
(Intentionally left blank)        
Core Spec Version 4.0, Adopted 17 Dec 2009  Core 4.0   C.1      
C.1: Mandatory to support only one of items 21/9 or 51/1.

Table 24: BR/EDR Controller Electrical Interfaces
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
UART Transport Layer  Ver 3.0 + HS,, Vol. 4, Part A   O      
USB Transport Layer  Ver 3.0 + HS, Vol. 4, Part B   O      
Secure Digital (SD) Transport Layer  Ver 3.0 + HS, Vol. 4, Part C   O      
Three-wire UART Transport Layer (3-Wire)  Ver 3.0 + HS, Vol 4, Part D   O      
No PICS/ profile ICS exists for this part.

Table 31: Host Core Specification
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Core Spec Version 1.2  Core 1.2   C.1      
(Intentionally left blank)        
Core Spec Version 2.0 + EDR  Core 2.0 +EDR   C.1      
(Intentionally left blank)        
Core Spec Version 2.1 + EDR  Core 2.1 +EDR   C.1      
Core Spec Addendum (CSA) 1, Volume 3, Part A Adopted June 26 2008  CSA1-Host   C.2      
Core Spec Version 3.0, Adopted 21 April 2009  Core 3.0   C.1      
Core Spec Version 3.0 + HS, Adopted 21 April 2009  Core 3.0 + HS   C.1      
10  Core Spec Version 4.0  Core 4.0   C.1      
11  Core Spec Version 4.0 + HS  Core 4.0 + HS   C.1      
C.1: Mandatory to select only one of items 31/2 – 31/6 (Core Spec Ver 1.2, Ver. 2.0 + EDR, Ver. 2.1 + EDR) or 31/8 – 31/9 (Core Spec Ver 3.0, Ver. 3.0 + HS) or 31/10 (Core Spec Ver 4.0)
C.2: Optional if 31/4 or 31/6 (Core Spec Version 2.0+EDR / 2.1 + EDR) is supported; otherwise excluded.

Table 33: Core Host Electrical Interfaces
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
UART Transport Layer  Ver. 3.0 + HS, Vol 4, Part A   O      
USB Transport Layer  Ver. 3.0 + HS, Vol 4, Part B   O      
Secure Digital (SD) Transport Layer  Ver. 3.0 + HS, Vol 4, Part C   O      
Three-wire UART Transport Layer (3-Wire)  Ver. 3.0 + HS, Vol 4, Part D   O      
No PICS/ profile ICS exists for this part.

Table 41: AMP Controller Core Specification

Prerequisite: ((21/5 OR 21/6 OR 21/8) AND (PROD:1/1 AND 31/9)) OR (PROD:1/5 AND (21/5 OR 21/6 OR 21/8)) OR PROD:1/2 OR PROD:1/3
(Must support BR/EDR Controller Ver. 2.1 or 2.1 + EDR or 3.0 and Host 3.0+HS for End Products
or BR/EDR Controller Version 3.0 or 2.1 or 2.1+EDR for Controller Subsystems or One of the Component Product Types)
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Core Spec Version 3.0 + HS or later, Adopted 21 April 2009  N/A   O      

Table 42: AMP Controller Specification Parts
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
802.11 Protocol Adaptation Layer (802.11 PAL)  Ver. 3.0 + HS, Vol. 5, Part A   C.1      
802.11 MAC/PHY  Ver. 3.0 + HS, EE 802.11-2007   C.2      
C.1. Mandatory if 41/1 is supported otherwise Excluded.
C.2. Mandatory if (11/1 or 11/5) AND (21/6 OR 21/8) otherwise Optional. (Mandatory for End Products or Controller Subsystems with AMP Controller and BR/EDR Controller 3.0 or 2.1+EDR).

Table 43: AMP Controller Electrical Interfaces
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
UART Transport Layer  Vol. 4, Part A         
USB Transport Layer  Vol. 4, Part B         
Secure Digital (SD) Transport Layer  Vol 4, Part C         
Three-wire UART Transport Layer (3-Wire)  Vol 4, Part D         
No PICS/ profile ICS exists for this part.

Table 51: Low Energy Controller Core Specification

BR/EDR Controller Core version shall not be either of (21/2 OR 21/3 OR
21/4 OR 21/5 OR 21/5 OR 21/8). In other words, shall not claim support for any
Controller Core specification other than 21/9 (Core 4.0) or later)
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Core Spec Version 4.0 – Low Energy Option Adopted 17 Dec 2009  N/A   C.1      
Note: For implementations supporting both BR/EDR and 4.0 controller core configurations, both 21/9 and 51/1 shall be supported. For implementations supporting only 4.0 controller core configuration, 51/1 shall be
supported and 21/9 shall not be claimed. For implementations supporting 4.0 controller core configuration without 4.0 option, 51/1 shall not be supported and 21/9 shall be claimed
C.1: Mandatory to support 51/1 or one of items 21/2 - 21/6 or 21/8 – 21/9.

Table 52: Low Energy Host Core Specification
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Core Spec Version 4.0   N/A    C.1      





EDR Features   [ top ]

Table 22: EDR Features

Prerequisite: 21/3 OR 21/4 OR 21/5 OR 21/6 OR 21/8 (Ver. 2.0 or Ver. 2.0 + EDR or Ver. 2.1 or 2.1 + EDR)
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
EDR for asynchronous transports (single slot)   2.0+EDR, 2.1+EDR, 3.0+HS   C.1      
EDR for asynchronous transports (multi-slot)   2.0+EDR, 2.1+EDR, 3.0+HS    C.1      
EDR for synchronous transports  2.0+EDR, 2.1+EDR   C.1, C.3      
EDR for synchronous transports   CSA1: Volume 0, Part B Section 4.2, 3.0 + HS   C.1, C.2      
C.1:Mandatory to support at least one of the EDR features if supporting 21/4 (Core 2.0+EDR) or 21/6 (Core 2.1+EDR) else Optional if 21/3 (Core 2.0) OR 21/5 (Core 2.1) OR 21/8 (Core 3.0) OR OR 21/9 (Core 4.0) ELSE excluded.
C.2: Pre-requisite 21/7 (CSA1) OR 21/8 (3.0) OR 21/9 OR 21/10
C.3: Excluded if 22/4 is supported. (Cannot support both 22/3 and 22/4)





  Product Type  
  External to All Layers  



Product Types   [ top ]

Table 1: Product Types

Please confirm the Product Type that was selected when Creating New Project
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
End Product   N/A    M.1      
Component (Tested)   N/A    M.1      
Component (Non-Tested)   N/A    M.1      
Host Subsystem   N/A    M.1      
Controller Subsystem   N/A    M.1      
Profile Subsystem   N/A    M.1      
Test Equipment   N/A    M.1      
Development Tool  N/A    M.1      
M.1: Must choose one and only one Product Type.





  Radio  
  Vol 2, Part A  



1.3.1 General Information   [ top ]

Table 1: RF Capabilities
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Power Class = 1  RF, 3   M.1      
Power Class = 2  RF, 3   M.1      
Power Class = 3  RF, 3   M.1      
Power Control  RF, 3   C.1      
1-slot packets supported  RF, 3.3   M      
3-slot packets supported  RF, 3.3   O      
5-slot packets supported  RF, 3.3   O      
79 Channels  RF, 2   M      
Support for GFSK modulation  RF, 3.1   M      
10  Support for pi/4-DQPSK modulation  RF, 3.2   C.2      
11  Support for 8DPSK modulation  RF, 3.3   C.3      
12  Enhanced Power Control  RF, 3   C.4      
M.1: Must choose One and only One Power Class
C.1: Mandatory to support IF 1/1 (Power Class 1) is supported, ELSE Optional
C.2: Mandatory if SUM_ICS 21/4 OR SUM_ICS 21/6 OR (SUM_ICS 21/8 AND EDR Support) is claimed; Optional if SUM_ICS 21/3 OR SUM_ICS 21/5 OR SUM_ICS, 21/8 is claimed; Excluded otherwise.
C.3: Mandatory if SUM_ICS 21/4 OR SUM_ICS 21/6 OR (SUM_ICS 21/8 AND EDR Support) is claimed; Else Optional if 1/8 AND (SUM_ICS 21/3 OR SUM_ICS 21/5 OR SUM_ICS 21/8) is claimed; Excluded otherwise.
C.4 Optional if SUM_ICS, 21/8 AND 1/4 supported, ELSE excluded.





  Baseband   
  Vol 2, Part B  



Physical Channel   [ top ]

Table 1: Physical Channel
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Support frequency band and 79 RF channels  BB, 2.1   M      
Adaptive Frequency Hopping Kernel  BB, 2.6   M      

Table 1a: Modulation Schemes
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Basic Data Rate, 1 Mbps payload data rate  RF, 3.1   M      
Enhanced Data Rate, 2 Mbps payload data rate  RF, 3.2   C.1      
Enhanced Data Rate, 3 Mbps payload data rate  RF, 3.2   C.2      
C.1 Mandatory IF (SUMMARY 22/1 OR SUMMARY 22/2 OR SUMMARY 22/3 OR SUMMARY 22/4) is claimed, Optional IF SUMMARY(21/5 OR SUMMARY 21/8) is claimed
C.2 Mandatory IF SUMMARY(SUMMARY 22/1 OR SUMMARY 22/2 OR SUMMARY 22/3 OR SUMMARY 22/4) is claimed, Optional IF BB(1a/2) AND SUMMARY(21/5 OR SUMMARY 21/8) are claimed


Physical Links   [ top ]

Table 2: Link Types
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Support of ACL link  BB, 5.2   M      
Support of SCO link  BB, 5.4   O      
Support of eSCO link  BB, 4.3   O      
Support of Enhanced Data Rate ACL links  BB, 6.5.4   C.1      
Support of Enhanced Data Rate eSCO links  BB, 6.5.3   C.2      
C.1 Mandatory IF SUMMARY(22/1) OR SUMMARY(22/2) is claimed, Optional IF SUMMARY(21/5) OR SUMMARY(21/6 OR SUMMARY 21/8) is claimed
C.2 Mandatory IF SUMMARY(22/3) is claimed, Optional IF SUMMARY(21/5) OR SUMMARY(21/6) is claimed
C.2 Mandatory IF SUMMARY(22/3) is claimed, Optional IF SUMMARY(21/5) OR SUMMARY(21/6 OR SUMMARY 21/8) is claimed

Table 3: SCO Link Support

Prerequisite for Items (3/5-8):(2/3) (Support of eSCO link)
Prerequisite for Items (3/1-4):(2/2) (Support of SCO link)
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Values
Allowed Supported
SCO links to same Slave  BB, 4.3  C.1      (1,2,3)
SCO links to different Slaves  BB, 4.3      (1,2,3)
SCO links from same Master  BB, 4.3  C.1      (1,2,3)
SCO links from different Masters  BB, 4.3      (> 2)
eSCO links to same Slave  BB, 4.2  C.2      (1,2,3,4,5,6)
eSCO links to different Slaves  BB, 4.2      (2,3,4,5)
eSCO links from same Master  BB, 4.2  C.2      (1,2,3,4,5,6)
eSCO links from different Masters  BB, 4.2      (2,3,4,5)
C.2: Mandatory to support at least One link (3/5 or 3/7)
C.1: Mandatory to support at least One link (3/1 3/3)


Packet Types   [ top ]

Table 4: Common Packet Types
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Support of ID packet type  BB, 6.5.1
BB,6.5.1.1  
M      
Support of NULL packet type  BB, 6.5.1
BB, 6.5.1.2  
M      
Support of POLL packet type  BB, 6.5.1
BB, 6.5.1.3  
M      
Support of FHS packet type  BB, 6.5.1
BB,6.5.1.4  
M      
Support of DM1 packet type  BB, 6.5.1
BB, 6.5.1.5
BB, 6.5.4
BB, 6.5.4.1  
M      

Table 5: ACL Packet Types
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Support of DH1 packet type  BB, 6.5.4
BB,6.5.4.2  
M      
Support of DM3 packet type  BB, 6.5.4
BB,6.5.4.3  
O      
Support of DH3 packet type  BB, 6.5.4
BB,6.5.4.4  
O      
Support of DM5 packet type  BB, 6.5.4
BB,6.5.4.5  
O      
Support of DH5 packet type  BB, 6.5.4
BB,6.5.4.6  
O      
Support of AUX1 packet type  BB, 6.5.4
BB,6.5.4.7  
O      

Table 5a: Enhanced Data Rate ACL Packet Types

Prerequisite: 2/4 (Support of Enhanced Data Rate ACL Links)
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Support 2-DH1 packet type  BB, 6.5.4.8   C.1      
Support 2-DH3 packet type   BB, 6.5.4.9   C.2      
Support 2-DH5 packet type   BB, 6.5.4.10   C.2      
Support 3-DH1 packet type   BB, 6.5.4.11   C.3      
Support 3-DH3 packet type   BB, 6.5.4.12   C.4      
Support 3-DH5 packet type   BB, 6.5.4.13   C.5      
C.1 Mandatory IF SUMMARY(22/1) OR SUMMARY(22/2) is claimed, Optional IF BB(1a/2) is claimed
C.2 Mandatory IF SUMMARY(22/2) is claimed, Optional IF BB(1a/2) is claimed
C.3 Mandatory IF SUMMARY(22/1) OR SUMMARY(22/2) is claimed, Optional IF BB(1a/3) is claimed
C.4 Mandatory IF SUMMARY(22/2) is claimed, Optional IF BB(5a/2) AND BB(5a/4) are claimed
C.5 Mandatory IF SUMMARY(22/2) is claimed, Optional IF BB(5a/3) AND BB(5a/4) are claimed

Table 6: SCO and eSCO Packet Types

Prerequisite for Items (6/1-4):(2/2) (Support of SCO link)
Prerequisite for Items (6/5-7):(2/3) (Support of eSCO link)
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Support of HV1 packet type  BB, 6.5.2
BB,6.5.2.1  
C.1      
Support of HV2 packet type  BB, 6.5.2
BB,6.5.2.2  
O      
Support of HV3 packet type  BB, 6.5.2
BB,6.5.2.3  
O      
Support of DV packet type  BB, 6.5.2
BB,6.5.2.4  
C.1      
Support of EV3 packet type  BB, 6.5.3
BB,6.5.3.1  
C.2      
Support of EV4 packet type  BB, 6.5.3
BB,6.5.3.2  
O      
Support of EV5 packet type  BB, 6.5.3
BB,6.5.3.3  
O      
C.1 Mandatory IF only (2/2) SCO link is supported
C.2 Mandatory IF only (2/3) eSCO link is supported

Table 6a: Enhanced Data Rate eSCO Packet Types

Prerequisite: 2/5 (Support of Enhanced Data Rate eSCO links)
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Support 2-EV3 packet type  BB, 6.5.3.4   C.1      
Support 2-EV5 packet type  BB, 6.5.3.5   C.2      
Support 3-EV3 packet type  BB, 6.5.3.6   C.3      
Support 3-EV5 packet type  BB, 6.5.3.7   C.4      
C.1 Mandatory IF SUMMARY(22/3) is claimed, Optional IF BB(1a/2) is claimed
C.2 Optional IF BB(1a/2) is claimed
C.3 Mandatory IF SUMMARY, 2-2/3 is supported AND SUMMMARY, 2-2/4 is NOT supported; ELSE Optional IF BB, 1a/3 is supported; Excluded otherwise.
C.4 Optional IF BB(1a/3) is claimed


Access Procedures   [ top ]

Table 7: Page Procedures
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Support paging  BB, 8.3.2   M      
Support page scan  BB, 8.3.1   M      
(Intentionally left blank)        
(Intentionally left blank)        
Supports Interlaced Scan during page scan  BB, 2.4   O      

Table 8: Paging Schemes
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Supports mandatory scan mode  BB, 8.3
BB, table 6.5  
M      

Table 9: Paging Modes
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Supports paging mode R0  BB, 8.3.1
BB, table 8.1  
C.1      
Supports paging mode R1  BB, 8.3.1
BB, table 8.1  
C.1      
Supports paging mode R2  BB, 8.3.1
BB, table 8.1  
C.1      
C.1: At least One of the paging scan modes Must be supported

Table 9b: Paging Train Repetition
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Supports Npage >= 1  BB, 8.3.2
BB, table 8.2  
O      
Supports Npage >= 128  BB, 8.3.2
BB, table 8.2  
O      
Supports Npage >= 256  BB, 8.3.2
BB, table 8.2  
M      
Note: The master should use Npage >= 256 unless it knows what SR mode the slave uses.

Table 10: Inquiry Procedures
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Support inquiry  BB, 8.4.2   O      
Inquiry scan with first FHS  BB, 8.4.2   O      
(Intentionally left blank)        
(Intentionally left blank)        
Supports the dedicated inquiry access code  BB, 6.3.1   O      
Supports interlaced Scan during inquiry scan  BB, 2.5   O      
Extended Inquiry Response  BB, 8.4.2, BB 8.4.3   O      


Networking Capabilities   [ top ]

Table 11: Piconet Capabilities
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Values
Allowed Supported
Broadcast messages  BB, 7.6.1
BB, 7.6.5 
    (N/A)  
Point-to-multipoint connections  BB, 1      (2,3,4,5,6,7)

Table 12: Scatternet Capabilities
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Act as Master in one piconet and Slave in another piconet  BB, 1   O      
Act as Slave in more than one piconet  BB, 1   O      


Synchronous Data Formats   [ top ]

Table 13: Synchronous Coding Schemes

Prerequisite: 2/2 (SCO link support)
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
A-law  BB, 9.1   O      
u-law  BB, 9.1   O      
CVSD  BB, 9.2   O      
Transparent Synchronous Data  BB, 5.4
BB, 5.5  
O      


Erroneous Data Reporting   [ top ]

Table 14: Erroneous Data Reporting
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Erroneous Data Reporting for SCO  BB 7.7   C.1      
Erroneous Data Reporting for eSCO  BB 7.7   C.2      
C.1: Optional IF ((SUM ICS: 21/5 OR SUM ICS: 21/6 OR SUMMARY 21/8) AND HCI: 9/6) is supported, ELSE excluded.
C.2: Optional IF ((SUM ICS: 21/5 OR SUM ICS: 21/6 OR SUMMARY 21/8) AND HCI: 9/7) is supported, ELSE excluded.


Persistent Sniff   [ top ]

Table 15: This table is intentionally left blank: DO NOT USE
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
(Intentionally left blank)        


Non-flushable Packet Boundary Flag   [ top ]

Table 16: Non-flushable Packet Boundary Flag
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Support Non-flushable Packet Boundary Flag  Vol 2, Part B, Section 7.6.3   C.1      
C.1 MANDATORY IF ((SUM ICS: 21/5 OR SUM ICS 21/6 OR SUMMARY 21/8) AND HCI: 12/10) is supported, ELSE OPTIONAL IF (SUM ICS: 21/5 OR SUM ICS: 21/6 OR SUMMARY 21/8) is supported, ELSE excluded.


Connection States   [ top ]

Table 17: Connection States
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Sniff Subrating Mode  Vol 2, Part C, Section 4.5.3.3   C.1      
C.1 MANDATORY IF ((SUM ICS: 21/5 OR SUM ICS 21/6 OR SUMMARY 21/8) AND LMP: 2/8) is supported, ELSE OPTIONAL IF (SUM ICS: 21/5 OR SUM ICS: 21/6 OR SUMMARY 21/8) is supported, ELSE excluded.





  Link Manager  
  Vol 2, Part C  



General Response Messages   [ top ]

Table 1: Response Messages
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Accept message  LMP, 2.7   M      
Reject message  LMP, 2.7   M      


Supported Features (General Statement)   [ top ]

Table 2: Supported Features

Note: This table refers to the values in the LM feature request message. It is used within this PICS as a general statement that will be used as prerequisite for other tables.
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
3-slot packets  LMP, 4.1.10,
LMP,3.3  
O      
5-slot packets  LMP, 4.1.10,
LMP, 3.3  
O      
Encryption  LMP, 4.2.5,
LMP, 3.3  
C.5      
Slot offset  LMP, 4.4.1,
LMP, 3.3  
O      
Timing accuracy  LMP, 4.3.1,
LMP, 3.3  
O      
Role switch (Master/Slave)  LMP,4.4.2,
LMP, 3.3  
O      
Hold mode  LMP,4.5.1,
LMP, 3.3  
O      
Sniff mode  LMP,4.5.3,
LMP, 3.3  
O      
Park mode  LMP,4.5.2,
LMP, 3.3  
O      
10  Power Control  RF, 3
LMP, 4.1.3,
LMP, 3.3  
C.1      
11  Channel quality driven data rate  LMP, 4.1.7,
LMP, 3.3  
O      
12  SCO link  LMP, 4.6.1,
LMP, 3.3  
O      
13  RSSI  LMP, 3.3   O      
14  Broadcast encryption  LMP, 4.2.5,
LMP, 3.3  
O      
15  eSCO link  LMP, 4.6.2   O      
16  Adaptive frequency hopping  LMP, 4.1.4   M      
17  Enhanced Data Rate ACL  BB, 6.5.4
LMP, 3.3  
C.2      
18  Enhanced Data Rate eSCO  BB, 6.5.3
LMP, 3.3  
C.3      
19  Simple Pairing  LMP 4.2.7   C.4      
20  Enhanced Power Control  LMP, 4.1.3.1, LMP, 3.3   C.6      
21  BR/EDR Not Supported  LMP, 3.3   O      
22  LE Supported (Controller)  LMP, 3.3   O      
23  LE and BR/EDR to same device capable (Controller)  LMP, 3.3   O      
24  LE Supported (Host)  LMP, 3.3   C.7      
25  Simultaneous LE and BR/EDR to same device capable (Host)  LMP, 3.3   C.8      
C.1: Mandatory IF (RF:1/1) supported, ELSE Optional
C.2 Mandatory IF (SUMMARY:22/1) OR (SUMMARY:22/2) is claimed, ELSE Optional IF (SUMMARY:21/5) OR (SUMMARY:21/6) OR (SUMMARY:21/8) is claimed. Excluded otherwise.
C.3 Mandatory IF (SUMMARY:22/3) is claimed, Optional IF (SUMMARY:21/3) OR (SUMMARY:21/4) OR (SUMMARY:21/5) OR (SUMMARY:21/6) OR (SUMMARY:21/8) is claimed. Excluded Otherwise.
C.4 Mandatory IF (SUMMARY 21/5 OR SUMMARY 21/6 OR SUMMARY 21/8)) is claimed, ELSE Excluded.
C.5 Optional IF (SUMMARY 21/1 OR SUMMARY 21/2 OR SUMMARY 21/3 OR SUMMARY 21/4) ELSE Mandatory
C.6 Optional IF SUMMARY 21/8 AND 2/10 AND 2/13 supported. Excluded otherwise.
C.7: Mandatory IF 2/22 is supported, ELSE Excluded.
C.8: Mandatory IF 2/24 is supported, ELSE Excluded.


Authentication   [ top ]

Table 3: Authentication
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Initiate authentication before connection completed  LMP, 4.2.1   O      
Initiate authentication after connection completed  LMP, 4.2.1   O      
Respond to authentication request  LMP, 4.2.1   M      


Pairing   [ top ]

Table 4: Pairing
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Initiate pairing before connection completed  LMP, 4.2.2   O      
Initiate pairing after connection completed  LMP, 4.2.2   O      
Respond to pairing request  LMP, 4.2.2.1,
LMP, 4.2.2.3  
M      
Use fixed PIN and request responder to initiator switch  LMP, 4.2.2.2   C.1      
Use variable PIN  LMP, 4.2.2.2   C.1      
Accept initiator to responder switch  LMP, 4.2.2.2   C.2      
C.1: Mandatory to support at least One, (LMP:4/4) OR (LMP:4/5) OR both
C.2: Mandatory IF (LMP: 4/5) AND (LMP:4/1), OR (LMP: 4/5) AND (LMP:4/2) ) is supported.


Link Keys   [ top ]

Table 5: Link Keys
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Creation of link key - Unit Key  LMP, 4.2.2.4   C.1      
Creation of link key - Combination Key  LMP, 4.2.2.4   C.1      
Initiate change of link key  LMP, 4.2.3   O      
Accept change of link key  LMP, 4.2.3   M      
(Intentionally left blank)           
(Intentionally left blank)           
Accept pairing with Unit Key  LMP, 4.2.2.4   O      
C.1: Mandatory to support at least One - either (LMP:5/1) OR (LMP:5/2).


Encryption   [ top ]

Table 6: Encryption

Prerequisite: 2/3 (Encryption supported)
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Initiate encryption  LMP, 4.2.5.1   C.1      
Accept encryption requests  LMP, 4.2.5.1   M.1      
(Intentionally left blank)           
(Intentionally left blank)           
Key size negotiation  LMP, 4.2.5.2   M.1      
Start encryption, as master  LMP, 4.2.5.3   M.1      
Accept start of encryption  LMP, 4.2.5.3   M.1      
Stop encryption , as master  LMP, 4.2.5.4   M.1      
Accept stop of encryption  LMP, 4.2.5.4   M.1      
10  Encryption Pause/Resume  LMP 4.2.5.3   C.2      
M.1: Mandatory IF (LMP:2/3) - (Encryption) is supported.
C.1 Mandatory IF (SUMMARY 2-1/5 OR SUMMARY 2-1/6) is claimed, ELSE Optional.
C.2: Mandatory IF (SUMMARY 21/5 OR SUMMARY 21/6 OR SUMMARY 21/8) is claimed, ELSE Excluded.


Information Requests   [ top ]

Table 7: Clock Offset Information
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Request clock offset information  LMP, 4.3.2   O      
Respond to clock offset requests   LMP, 4.3.2   M      

Table 8: Slot Offset Information

Prerequisite: 2/4 (Slot offset)
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Send slot offset information  LMP, 4.4.1   C.1      
C.1: Mandatory IF (LMP:13/1) - (Master/Slave switch) supported, ELSE Optional.

Table 9: Timing Accuracy Information

Prerequisite: 2/5 (Timing accuracy)
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Request timing accuracy information  LMP, 4.3.1   O      
Respond to timing accuracy information requests  LMP, 4.3.1   M.1      
M.1: Mandatory IF (LMP:2/5) - (Timing Accuracy) supported

Table 10: LM Version Information
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Request LM version information  LMP, 4.3.3   O      
Respond to LM version information requests  LMP, 4.3.3   M      

Table 11: Feature Support
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Request supported features  LMP, 4.3.4   C.1      
Respond to supported features requests  LMP, 4.3.4   M      
Request extended features mask  LMP, 4.3.4   C.2      
Respond to extended features Request  LMP, 4.3.4   C.2      
C.1: Mandatory IF any of the Optional features in (LMP:2/1-3), (LMP:2/5), (LMP:2/7-12), (LMP:2/14-16), (LMP:26/1) is requested by the IUT, ELSE Optional.
C.2 Mandatory IF a feature requiring another features page is supported, ELSE Optional.

Table 12: Name Information
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Request name information   LMP, 4.3.5   O      
Respond to name requests  LMP, 4.3.5   M      


Link Handling   [ top ]

Table 13: Role Switch

Prerequisite: 2/6 (Role switch)
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Request Master Slave switch  LMP, 4.4.2   O      
Accept Master Slave switch requests  LMP, 4.4.2   M.1      
M.1 Mandatory IF LMP:(2/6) - (Role Switch) supported

Table 14: Detach
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Detach connection  LMP, 4.1.2   M      

Table 14a: Setting Up and Removing Enhanced Data Rate ACL Connection
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Enter Enhanced Data Rate  LMP, 4.1.11   C.1      
Exit Enhanced Data Rate  LMP, 4.1.11   C.1      
C.1 Mandatory IF (LMP:2/17) supported, ELSE Excluded.

Table 14b: Setting Up and Removing Enhanced Data Rate eSCO Connection
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Enter and Exit eSCO Using Enhanced Data Rate Packets  LMP, 4.6.2   C.1      
C.1 Mandatory IF (LMP:2/18) supported, ELSE Excluded.

Table 15: Hold Mode

Prerequisite: 2/7 (Hold mode)
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Force hold mode  LMP, 4.5.1,
LMP, 4.5.1.2  
O      
Request hold mode  LMP, 4.5.1,
LMP, 4.5.1.3  
C.1      
Respond to hold mode requests  LMP, 4.5.1,
LMP, 4.5.1.3  
M      
Accept forced hold mode  LMP, 4.5.1.1,
LMP, 4.5.1.2  
M      
C.1: Mandatory IF (LMP:15/1) - (Force hold mode) is supported, ELSE Optional.

Table 16: Sniff Mode

Prerequisite: 2/8 (Sniff mode)
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
(Intentionally left blank)           
Request sniff mode  LMP, 4.5.3,
LMP, 4.5.3.2  
O      
Respond to sniff mode requests (renegotiate or reject)  LMP, 4.5.3.2   M.1      
(Intentionally left blank)           
Request un-sniff  LMP, 4.5.3.2   C.1      
Accept un-sniff requests  LMP, 4.5.3.2   M.1      
Sniff Subrating Mode  LMP, 4.5.3.3   C.2      
C.1: Mandatory IF (LMP:16/2) - (Request sniff mode) is supported, ELSE Optional.
M.1: Mandatory IF (LMP:2/8) - (Sniff Mode) is supported.
C.2 Mandatory IF (SUMMARY 2-1/5 OR SUMMARY 2-1/6 OR SUMMARY 21/8) is claimed, ELSE Excluded

Table 17: Park Mode

Prerequisite: 2/9 (Park Mode)
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
(Intentionally left blank)           
Request park mode  LMP, 4.5.2,
LMP, 4.5.2.2,
LMP, 4.5.2.3  
O      
Respond to park mode requests  LMP, 4.5.2,
LMP, 4.5.2.2,
LMP, 4.5.2.3  
M.1      
(Intentionally left blank)           
Set up broadcast scan window  LMP, 4.5.2.3   O      
Accept changes to the broadcast scan window  LMP, 4.5.2.3   M.1      
Modify beacon parameters  LMP, 4.5.2.4   O      
Accept modification of beacon parameters  LMP, 4.5.2.4   M.1      
Request Unpark using PM_ADDR  LMP, 4.5.2.5   C.1      
10  Request Unpark using BD_ADDR  LMP, 4.5.2.5   C.1      
11  Slave requested Unpark  LMP, 4.5.2.5,
BB, 5.9.6  
O      
12  Accept Unpark using PM_ADDR  LMP, 4.5.2.5   M.1      
13  Accept Unpark using BD_ADDR  LMP, 4.5.2.5   M.1      
M.1: Mandatory IF (LMP:2/9) - (Park Mode) is supported
C.1: IF (LMP:17/3) - (Respond to park mode requests) is supported, THEN at least One of (LMP:17/9) - (Unpark using PM_ADDR) OR (LMP:17/10) - (Unpark using BD_ADDR) is Mandatory, ELSE Optional.

Table 18: Power Control

Prerequisite for Items (18/1-2): (2/13) (RSSI)
Prerequisite for Items (18/3-4): (2/10) (Power Control)
Prerequisite for Items (18/5-10): (2/20) (Enhanced Power Control)
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Request to increase power  LMP, 4.1.3   M.1      
Request to decrease power  LMP, 4.1.3   M.1      
Respond when max power reached  LMP, 4.1.3   M.2      
Respond when min power reached  LMP, 4.1.3   M.2      
Request to increment power a single step  LMP, 4.1.3.1.1   M.3      
Request to decrease power a single step  LMP, 4.1.3.1.1    M.3      
Request to go to max power  LMP, 4.1.3.1.1   O      
Respond to increment power a single step  LMP, 4.1.3.1.2   M.3      
Respond to decrease power a single step  LMP, 4.1.3.1.2   M.3      
10  Respond to go to max power  LMP, 4.1.3.1.2   M.3      
M.1: Mandatory IF (LMP:2/13) - (RSSI) is supported
M.2: Mandatory IF (LMP:2/10) - (Power Control) is supported
M.3: Mandatory IF (LMP:2/20) - (Enhanced Power Control) is supported

Table 19: Link Supervision Timeout
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Set link supervision timeout value  LMP, 4.1.6   O      
Accept link supervision timeout setting  LMP, 4.1.6   M      


Quality of Service   [ top ]

Table 20: Quality of Service
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Channel quality driven change between DM and DH packet type  LMP, 4.1.7   C.1      
Force/Request change of Quality of Service  LMP, 4.1.8,
LMP, 4.1.8.1  
M      
Request Change of Quality of Service  LMP, 4.1.8,
LMP, 4.1.8.2  
M      
C.1: Mandatory IF support of (LMP:2/11) is stated in the feature request, ELSE Optional.


SCO Links   [ top ]

Table 21: SCO Links

Prerequisite: 2/12 (SCO link)
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Initiate SCO links, as Master  LMP, 4.6.1,
LMP, 4.6.1.1  
O      
Initiate SCO links, as Slave  LMP, 4.6.1,
LMP, 4.6.1.2  
O      
Accept SCO links  LMP, 4.6.1,
LMP, 4.6.1.1,
LMP, 4.6.1.2  
O      
Remove SCO links, as Master  LMP, 4.6.1,
LMP,4.6.1.5  
C.1      
Remove SCO links, as Slave  LMP, 4.6.1,
LMP,4.6.1.5  
C.2      
Negotiate SCO link parameters, as Master  LMP, 4.6.1,
LMP,4.6.1.3  
C.3      
Negotiate SCO link parameters, as Slave  LMP, 4.6.1,
LMP,4.6.1.4  
C.4      
C.1: Mandatory IF (LMP:21/1) - (Initiating SCO links, as Master) is supported, ELSE Optional.
C.2: Mandatory IF (LMP:21/2) - (Initiating SCO links, as Slave) is supported, ELSE Optional.
C.3: Mandatory IF (LMP:21/1) - (Initiating SCO links, as Master) OR (LMP:21/3) - (Accept SCO links) is supported, ELSE Optional.
C.4: Mandatory IF (LMP:21/2) - (Initiating SCO links, as Slave) OR (LMP:21/3) - (Accept SCO links) is supported, ELSE Optional.


Multi-Slot Packages   [ top ]

Table 22: Multi-Slot Packages
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Accept maximum allowed number of slots to be used  LMP, 4.1.10   C.1      
Request maximum number of slots to be used  LMP, 4.1.10   C.1      
Accept request of maximum number of slots to be used  LMP, 4.1.10   C.1      
C.1: Mandatory IF (LMP:2/1) AND/OR (LMP:2/2) is supported in the feature request, ELSE Optional.


Paging Scheme   [ top ]

Table 23: Paging Scheme
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Request page mode to use  LMP, 4.1.9,
LMP, 4.1.9.1  
O      
Accept suggested page mode  LMP, 4.1.9,
LMP,4.1.9.1  
O      
Request page scan mode to use  LMP, 4.1.9,
LMP,4.1.9.2  
O      
Accept suggested page scan mode  LMP, 4.1.9, LMP, 4.1.9.2   O      


Connection Establishment   [ top ]

Table 24: Connection Establishment
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Create connection for higher layers  LMP, 4.1.1   M      
Respond to requests to establish connections for higher layers  LMP, 4.1.1   M      
Indicate that link set-up is complete  LMP, 4.1.1   M      


Test Mode   [ top ]

Table 25: Test Mode
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Activate test mode  LMP, 4.7.1   O      
Ability to reject activation of test mode if test mode is disabled  LMP, 4.7.1   M      
Control test mode  LMP, 4.7.2   O      
Ability to reject est mode control commands if test mode is disabled.  LMP, 4.7.2   M      

Table 26: Adaptive Frequency Hopping

Prerequisite: 2/16 (AFH)
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Support of AFH switch as master  LMP, 4.1.4   O      
Support of AFH switch as slave  LMP, 4.1.4   M.1      
Support of Channel Classification reporting - post Role Switch (as Slave)  LMP, 4.1.5   C.1      
Support of Channel Classification reporting as slave  LMP, 4.1.5   C.2      
Support channel classification from host  LMP, 4.1.5   C.3      
Support of Channel Classification  LMP, 4.1.5   O      
C.1: Optional IF (LMP:26/6) is supported, ELSE Excluded.
C.2: Mandatory IF (LMP:26/6) is supported, ELSE Excluded.
C.3: Mandatory IF (LMP:26/1) OR (LMP:26/4) is supported, ELSE Optional.
M.1: Mandatory IF (LMP:2/16) - (AFH) supported

Table 27: This Table is intentionally left blank.
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
This line is intentionally left blank.  N/A   O      
This line is intentionally left blank.  N/A   O      
N/A  N/A   O      
N/A  N/A   O      





  Host Controller Interface  
  Vol 2, Part E  



2.1 Generic Events   [ top ]

Table 1: Generic Events
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Command Complete   7.7.14   M      
1a  Support all HCI Commands  N/A   C.1      
C.1: Mandatory if all HCI commands are supported excluded otherwise.

Table 1a: Roles
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
BR/EDR Controller  2. 0   O.1      
Host  2. 0   O.1      
O.1: It is mandatory to support at least one of the defined roles.


2.2 Device Setup   [ top ]

Table 2: Device Setup
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Reset Command   7.3.2    M      


2.3 Controller Flow Control   [ top ]

Table 3: Controller Flow Control
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Read Buffer Size Command  7.4.5   M      
Read Data Block Size Command  7.4.7   O      
Read Flow Control Mode Command  7.3.72   O      
Write Flow Control Mode  7.3.73   O      


2.4 Controller Information   [ top ]

Table 4: Controller Information
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Read Local Version Information  7.4.1   M      
Read Local Supported Commands Command  7.4.2    M      
Read Local Supported Features Command  7.4.3   M      
Read Local Extended Features Command  7.4.4   C.1      
Read BD_ADDR Command   7.4.6   M      
C.1: Mandatory if a feature requiring another features page is supported, otherwise optional.


2.5 Controller Configuration   [ top ]

Table 5: Controller Configuration
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Read Local Name Command  7.3.12   M      
Write Local Name Command  7.3.11   M      
Read Class of Device Command  7.3.27   M      
Write Class of Device Command  7.3.28    M      
Read Number Of Supported IAC Command  7.3.45   O      
Read Current IAC LAP Command  7.3.46    O      
Write Current IAC LAP Command   7.3.47   O      
Read Scan Enable Command  7.3.17   O      
Write Scan Enable Command  7.3.18   M      
10  Write Remote AMP Assoc command  7.3.10   Excluded      
11  Write Location Data command  7.3.70   Excluded      
12  Read Location Data command  7.3.71   Excluded      


2.6 Device Discovery   [ top ]

Table 6: Device Discovery
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Inquiry Command   7.1.1   C.1      
Inquiry Cancel Command  7.1.2   O      
Periodic Inquiry Mode Command  7.1.3   O      
Exit Periodic Inquiry Mode Command  7.1.4   O      
Read Inquiry Scan Activity Command  7.3.21   O      
Write Inquiry Scan Activity Command  7.3.22   O      
Read Inquiry Scan Type Command  7.3.51   O      
Write Inquiry Scan Type Command  7.3.52   O      
Read Inquiry Mode Command  7.3.53   O      
10  Write Inquiry Mode Command  7.3.54   O      
11  Read Inquiry Response Transmit Power Level Command  7.3.57   C.2      
12  Write Inquiry Transmit Power Level Command  7.3.58   C.2      
13  Read Extended Inquiry Response Command  7.3.51   C.3      
14  Write Extended Inquiry Response Command  7.3.52   C.3      
C.1: Mandatory to support if BB, 10/1 (Support Inquiry) is supported, otherwise optional.
C.2: Mandatory to support if (SUMMARY 21/5 OR SUMMARY 21/6 OR SUMMARY 31/6 OR SUMMARY 31/8 OR SUMMARY 31/9 OR SUMMARY 21/8) is claimed, ELSE Excluded.
C.3: Mandatory to support if (SUMMARY 21/5 OR SUMMARY 21/6 OR SUMMARY 31/6 OR SUMMARY 31/8 OR SUMMARY 31/9 OR SUMMARY 21/8) AND GAP 1/3 is claimed, ELSE Excluded.


2.7 Connection Setup   [ top ]

Table 7: Connection Setup
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Create Connection Command  7.1.5   M      
Accept Connection Request Command   7.1.8   M      
Reject Connection Request Command  7.1.9   M      
Create Connection Cancel Command  7.1.7   O      
Disconnect Command  7.1.6   M      
Read Page Timeout Command  7.3.15    M      
Write Page Timeout Command  7.3.16   M      
Read Page Scan Activity Command  7.3.19   M      
Write Page Scan Activity Command   7.3.20   M      
10  Read Page Scan Type Command  7.3.55   O      
11  Write Page Scan Type Command  7.3.56   O      
12  Read Connection Accept Timeout Command   7.3.13   M      
13  Write Connection Accept Timeout Command   7.3.14    M      


2.8 Remote Information   [ top ]

Table 8: Remote Information
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Remote Name Request  7.1.19   O      
Remote Name Request Cancel   7.1.20    O      
Read Remote Supported Features Command  7.1.21    M      
Read Remote Extended Features Command   7.1.22    C.2      
Read Remote Version Information Command  7.1.23    O      
C.2: Mandatory if LMP 11/3 (Request extended features mask) is supported, otherwise optional.


2.9 Synchronous Connections   [ top ]

Table 9: Synchronous Connections
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Setup Synchronous Connection Command   7.1.26   C.1      
Accept Synchronous Connection Request Command  7.1.27   C.2      
Reject Synchronous Connection Request Command   7.1.28   C.3      
Read Voice Setting Command   7.1.29   C.4      
Write Voice Setting Command  7.1.30   C.4      
SCO data via HCI  HCI, 5.4.3   O      
eSCO data via HCI  HCI, 5.4.3   O      
Write default Erroneous Data Reporting commands  HCI, 7.3.62   C.5      
Read Default Erroneous Data Reporting command  HCI, 7.3.61   C.5      
C.1: Mandatory to support if LMP, 21/1 (Initiating SCO links, as Master), or LMP, 21/2 (Initiating SCO links, as Slave) is supported, otherwise optional.
C.2: Mandatory to support if LMP, 21/3 (Accept SCO links) is supported, otherwise optional.
C.3: Mandatory to support if LMP, 21/3 (Accept SCO links) is NOT supported, otherwise optional.
C.4: Mandatory to support if LMP, 21/1 (Initiating SCO links, as Master) OR 21/2 (Initiating SCO links, as Slave) OR 21/3 (Accept SCO links) is supported, otherwise optional.
C.5: Optional to support IF (SUMMARY 21/5 OR SUMMARY 21/6 OR SUMMARY 31/6 OR SUMMARY 31/8 OR SUMMARY 31/9 OR SUMMARY 21/8) is supported, otherwise Excluded.


2.10 Connection State   [ top ]

Table 10: Connection State
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Hold Mode Command   7.2.1   C.1      
Sniff Mode Command  7.2.2   C.2      
Exit Sniff Mode Command  7.2.3   C.2      
Park State Command  7.2.4   C.3      
Exit Park State Command   7.2.5   C.4      
Read Link Policy Settings Command  7.2.9    M      
Write Link Policy Settings Command  7.2.10   M      
Read Default Link Policy Settings Command   7.2.11    M      
Write Default Link Policy Settings Command   7.2.12   M      
10  Read Hold Mode Activity  7.3.35    C.1      
11  Write Hold Mode Activity   7.3.36   C.1      
C.1: Mandatory to support if LMP, 15/1 (Force hold mode) is supported, otherwise optional.
C.2: Mandatory to support if LMP, 16/2 (Request sniff mode) is supported, otherwise optional.
C.3: Mandatory to support if LMP, 17/2 (Request park mode) is supported, otherwise optional.
C.4: Mandatory to support if LMP, 2/9 (Park mode) is supported, otherwise optional.


2.11 Piconet Structure   [ top ]

Table 11: Piconet Structure
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Role Discovery Command  7.2.7    O      
Switch Role Command  7.2.8   C.1      
C.1: Mandatory to support IF LMP, 13/1 (Request Master Slave switch) is supported, otherwise Optional.


2.12 Quality of Service   [ top ]

Table 12: Quality of Service
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Flow Specification Command   7.2.13   M      
QoS Setup Command  7.2.6    M      
Flush Command   7.3.4   M      
Read Automatic Flush Timeout Command   7.3.31   M      
Write Automatic Flush Timeout Command   7.3.32   M      
Read Failed Contact Counter Command  7.5.1   M      
Reset Failed Contact Counter Command  7.5.2   M      
Read Num Broadcast Retransmissions Command   7.3.33   C.4      
Write Num Broadcast Retransmissions Command  7.3.34   C.4      
10  Enhanced Flush Command  7.3.62   C.3      
17  Sniff Subrating Command  7.2.12   C.2      
18  Sniff Subrating Event  7.7.37   C.2      
C.2: Mandatory if BB 17/1 AND LMP 16/7 are supported in BB and LMP.
C.3: Mandatory IF (SUMMARY 21/5 OR SUMMARY 21/6 OR SUMMARY 31/6 OR SUMMARY 31/8 OR SUMMARY 31/9 OR SUMMARY 21/8) is supported.
C.4: Mandatory if BB 11/1 (Broadcast messages) is supported, otherwise optional.


2.13 Physical Links   [ top ]

Table 13: Physical Links
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Read Link Supervision Timeout Command   7.3.43   O      
Write Link Supervision Timeout Command   7.3.44   C.1      
Read AFH Channel Assessment Mode Command   7.3.57    C.2      
Write AFH Channel Assessment Mode Command   7.3.58   C.2      
Set AFH Host Channel Classification Command   7.3.50   C.2      
Change Connection Packet Type Command  7.1.14   C.3      
Link Supervision Timeout Changed Event  7.7.46   C.4      
C.1: Mandatory to support if LMP, 19/1 (Set link supervision timeout value) is supported, otherwise optional.
C.2: Mandatory to support if LMP, 26/6 (Support of Channel Classification) is supported, otherwise optional.
C.3: Mandatory to support if LMP, 2/1 (3-slot packets) and/or LMP, 2/2 (5-slot packets) is supported, otherwise optional.
C.4 Mandatory IF ( (SUMMARY 21/5 OR SUMMARY 21/6 OR SUMMARY 31/6 OR SUMMARY 31/8 OR SUMMARY 31/9 OR SUMMARY 21/8) ) is supported, ELSE Excluded.


2.14 Host Flow Control   [ top ]

Table 14: Host Flow Control
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Host Buffer Size Command  7.3.41   O      
Set Event Mask Command   7.3.1   O      
Set Event Filter Command  7.3.3   O      
Set Controller To Host Flow Control Command  7.3.40   O      
Host Number Of Completed Packets Command  7.3.42   O      
Read Synchronous Flow Control Enable Command  7.3.38   O      
Write Synchronous Flow Control Enable Command  7.3.39   O      
Read Data Block Size  7.4.7   O      
10  Read Flow Control Mode  7.3.72   O      
11  Write Flow Control Mode  7.3.73   O      
12  Number of Completed Packets Event  7.7.19   O      
13  Data Buffer Overflow Event  7.7.26   O      
15  Read LE Host Support Command  7.3.38   O      
16  Write LE Host Support Commadn  7.3.39   O      


2.15 Link Information   [ top ]

Table 15: Link Information
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Read LMP Handle Command  7.1.25    M      
Read Transmit Power Level Command  7.3.37   C.1      
Read Link Quality Command  7.5.3    O      
Read RSSI Command  7.5.4   C.2      
Read Clock Offset Command  7.1.24   O      
Read Clock Command  7.5.6   O      
Read AFH Channel Map Command  7.5.5   C.3      
C.1: Mandatory to support if LMP, 2/10 (Power Control) is supported, otherwise optional.
C.2: Mandatory to support if LMP, 2/13 (RSSI) is supported, otherwise optional.
C.3: Mandatory to support if LMP, 26/6 (Support of Channel Classification) is supported, otherwise optional.


2.16 Authentication and Encryption   [ top ]

Table 16: Authentication and Encryption
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Read Authentication Enable Command  7.3.23    C.1      
Write Authentication Enable Command  7.3.24   C.1      
Read Encryption Mode Command  7.3.25   C.2      
Write Encryption Mode Command   7.3.26   C.2      
Link Key Request Reply Command  7.1.10   M      
Link Key Request Negative Reply Command   7.1.11   M      
PIN Code Request Reply Command  7.1.12   M      
PIN Code Request Negative Reply Command  7.1.13   M      
Authentication Requested Command  7.1.15   O      
10  Set Connection Encryption Command  7.1.16   C.2      
11  Change Connection Link Key Command  7.1.17   O      
12  Master Link Key Command   7.1.18    C.3      
13  Read PIN Type Command  7.3.5   C.4      
14  Write PIN Type Command  7.3.6   C.4      
15  Read Stored Link Key Command  7.3.8   O      
16  Write Stored Link Key Command  7.3.9    O      
17  Delete Stored Link Key Command  7.3.10   O      
18  Create New Unit Key Command   7.3.7   C.5      
19  User Confirmation Request Reply Command  7.1.30   C.6      
20  User Confirmation Request Negative Reply Command  7.1.31   C.6      
21  User Passkey Request Reply Command  7.1.32   C.6      
22  User Passkey Request Negative Reply Command  7.1.33   C.6      
23  IO Capability Response Command  7.1.29   C.6      
24a  Remote OOB Data Request Reply Command  7.1.34   C.6      
25  Remote OOB Data Request Negative Reply Command  7.1.35   C.6      
26  Read Local OOB Data Command  7.3.56   C.6      
27  Write Simple Pairing Mode Command  7.3.55   C.6      
28  Read Simple Pairing Mode Command  7.3.54   C.6      
29  Refresh Encryption Key Command  7.3.53   C.7      
30  Read Encryption Key Size Command  7.5.7   C.8      
31  Send Keypress Notification Command  7.3.63   C.9      
37  Encryption Change Event  7.7.8   C.2      
38  Encryption Key Refresh Complete Event  7.7.39   C.2      
C.1: Mandatory to support if LMP, 3/1 (Initiate authentication before connection completed) is supported, otherwise optional.
C.2: Mandatory to support if LMP, 6/1 (Initiate encryption) is supported, otherwise optional.
C.3: Mandatory to support if LMP, 2/14 (Broadcast encryption) and LMP 6/6 (Start encryption, as master) are supported, otherwise optional.
C.4: Mandatory to support if LMP, 4/5 (Use variable PIN) is supported, otherwise optional.
C.5: Mandatory to support if LMP, 5/1 (Creation of link key - Unit Key) is supported, otherwise optional.
C.7: Mandatory IF (SUMMARY 21/5 OR SUMMARY 21/6 OR SUMMARY 31/6 OR SUMMARY 31/8 OR SUMMARY 31/9 OR SUMMARY 21/8) is supported, ELSE Optional
C.6 Mandatory IF (SUMMARY 21/5 OR SUMMARY 21/6 OR SUMMARY 31/6 OR SUMMARY 31/8 OR SUMMARY 31/9 OR SUMMARY 21/8) is supported, ELSE Excluded.
C.8 Optional IF ( SUMMARY 21/5 OR SUMMARY 21/6 OR SUMMARY 31/6 OR SUMMARY 31/8 OR SUMMARY 31/9 OR SUMMARY 21/8) is supported, ELSE Excluded
C.9 Optional IF (SUMMARY 21/5 OR SUMMARY 21/6 OR SUMMARY 31/6 OR SUMMARY 31/8 OR SUMMARY 31/9 OR SUMMARY 21/8) is supported, ELSE Excluded


2.17 Testing   [ top ]

Table 17: Testing
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Read Loopback Mode Command   7.6.1   O      
Write Loopback Mode Command  7.6.2   O      
Enable Device Under Test Mode Command  7.6.3   O      
Write Simple Pairing Debug Mode Command  7.6.4   C.1      
C.1 Mandatory IF ( (SUMMARY 21/5 OR SUMMARY 21/6 OR SUMMARY 31/6 OR SUMMARY 31/8 OR SUMMARY 31/9 OR SUMMARY 21/8) ) is supported, ELSE Excluded.





  Link Layer  
  Vol 6, Part B  



Controller States/Roles   [ top ]

Table 1: Controller States/Roles

Prerequisite: SUM.ICS 25/2
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Advertising State  [1]: 4.4.2   C.1      
Scanning State  [1]: 4.4.3   C.1      
Initiating State  [1]: 4.4.4   C.1      
Slave Role  [1]: 4.5.5   C.3      
Master Role  [1]: 4.5.4   C.2      
C.1: Mandatory to support (LL 1/1 OR LL 1/2 OR LL 1/3).
C.2 Mandatory to support if 1/3 is supported
C.3 Optional if 1/1 is supported, otherwise excluded





1.4.1 Address Types   [ top ]

Table 2: Device Addresses Types

Prerequisite: LL 1/1 OR LL 1/2 OR LL 1/3
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Public Address  [1]: 1.3   C.1      
Random Address  [1]: 1.3   C.1      
C.1: Mandatory to support (LL 2/1 OR LL 2/2).
Note: Condition C.1 means that an observer device only does not need a device address, any other does but the type selection is not constrained





1.5.1 Advertising State   [ top ]

Table 3: Protocol Advertising Features

Prerequisite: LL 1/1
(This section shall only be completed if LL 1/1 is supported)
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Non-Connectable Undirected Events  [1]: 4.4.2.6   O      
Connectable Undirected Events  [1]: 4.4.2.3   M      
Advertising Data  [1]: 4.4.2.3, 4.4.2.5, 4.4.2.6   M      
Connectable Directed Events  [1]: 4.4.2.4   O      
Discoverable Undirected Events  [1]: 4.4.2.5   O      
Sending Scan Responses  [1]: 4.4.2.3, 4.4.2.5    C.1      
Accepting Connection Requests  [1]: 4.4.2.3, 4.4.2.4    C.2      
Filtering Policies  [1]: 4.3.2   O      
C.1: Mandatory IF (LL 3/2 OR LL 3/5) is supported, ELSE Excluded
C.2 Mandatory IF (LL 3/2 OR LL 3/4) is supported, ELSE Excluded





1.6.1 Scanning State   [ top ]

Table 4: Protocol Scanning Features

Prerequisite: LL 1/2
(This section shall only be completed if LL 1/2 is supported)
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Passive Scanning  [1]: 4.4.3.1    C.1      
Receiving Advertising Data  [1]: 4.4.3.1, 4.4.3.2    M      
Active Scanning  [1]: 4.4.3.2    C.2      
Backoff Procedure  [1]: 4.4.3.2    C.3      
Filtering Policies  [1]: 4.3.3    O      
C.1 Mandatory IF (LL 4/3) is not supported, ELSE Optional
C.2 Mandatory IF (LL 4/1) is not supported, ELSE Optional
C.3 Mandatory IF (LL 4/3) is supported, ELSE Excluded.





1.7.1 Initiating State   [ top ]

Table 5: Protocol Initiating Features

Prerequisite: LL 1/3
(This section shall only be completed if LL 1/3 is supported)
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Requesting Connections  [1]: 4.4.4   M      
Requesting to Directed Advertising  [1]: 4.4.4   M      
Initiator Filtering  [1]: 4.3.4   M      





1.8.1 Slave Role   [ top ]

Table 6: Protocol Slave Role Features

Prerequisite: LL 1/4
(This section shall only be completed if LL 1/4 is supported)
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Slave Transmissions  [1]: 4.5.1, 4.5.5, 4.5.6   M      
Acknowledgement Scheme  [1]: 4.5.9   M      
Unknown Response  [1]: 5.1.4, 2.4.2   M      
Responding in Feature Setup  [1]: 5.1.4   M      
Sending Data  [1]: 4.5.1, 4.5.6   M      
Receiving Data  [1]: 4.5.1, 4.5.6   M      
More Data  [1]: 4.5.6   O      
HCI Fragmentation  [2]: 5   O      
LL Defragmentation  [2]: 5   O      
10  Accepting Parameter Update  [1]: 5.1.1   M      
11  Accepting Channel Map Update  [1]: 5.1.2   M      
12  Encryption Start  [1]: 5.1.3   O      
13  Connection Control Timer  [1]: 5.2   M      
14  Sending Termination  [1]: 5.1.6   M      
15  Accepting Termination  [1]: 5.1.6   M      
16  Connection Supervision Timer  [1]: 4.5.2   M      
17  (Intentionally left blank)        
18  Slave Pause Encryption  [1]: 5.1.3   O      
19  Slave Version Exchange  [1]: 5.1.5   M      
LL 6/5 indicates whether a device in the slave role supports data output from a Host.
LL 6/6 indicates whether the device supports data input to a Host.
LL 6/9 expresses if a Controller may recombine LL packets into HCI data packets.
Carrying HCI fragmentation flags in LL packets is indicated by LL 6/8





1.9.1 Master Role   [ top ]

Table 7: Protocol Master Role Features

Prerequisite: LL 1/5
(This section shall only be completed if LL 1/5 is supported)
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Master Transmissions  [1]: 4.5.1, 4.5.4, 4.5.6   M      
Acknowledgement Scheme  [1]: 4.5.9   M      
Unknown Responses  [1]: 5.1.4, 2.4.2   M      
Requesting Feature Setup  [1]: 5.1.4   M      
Sending Data  [1]: 4.5.1, 4.5.6   M      
Receiving Data  [1]: 4.5.1, 4.5.6   M      
More Data  [1]: 4.5.6   O      
HCI Fragmentation  [2]: 5   O      
LL Defragmentation  [2]: 5   O      
10  Requesting Parameter Update  [1]: 5.1.1   M      
11  Requesting Channel Map Update  [1]: 5.1.2   M      
12  Encryption Start  [1]: 5.1.3   O      
13  Connection Control Timer  [1]: 5.2   M      
14  Sending Termination  [1]: 5.1.6   M      
15  Accepting Termination  [1]: 5.1.6   M      
16  Connection Supervision Timer  [1]: 4.5.2   M      
18  Master Non-Connectable Events  [1]: 4.4.2.6   O      
19  Master Pause Encryption  [1]: 5.1.3   O      
20  Master Version Exchange  [1]: 5.1.5   M      
LL 7/5 indicates whether a device in the master role supports data output from a Host.
LL 7/6 indicates whether the device supports data input to a Host.
LL 7/18 indicates whether a device supports combining the advertising procedure to the master role.





Physical Channels   [ top ]

Table 8: Physical Channels
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Support frequency band and 40 physical channels  [1]:1.4   M      
Advertising channels (channel index 37, 38, 39)  [1]:1.4.1   M      
Support Data channel selection algorithm  [1]: 4.5.8   C.1      
C.1: Mandatory IF (LL 1/4 OR LL 1/5) is supported, ELSE Excluded





Supported Features   [ top ]

Table 9: Supported Features
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
LL Encryption  [1]: 4.6.1   C.1      
C.1: (Supported IF (6/12 AND 6/18) OR (7/12 AND 7/19))





  RF PHY  
  Vol 6, Part A  



Capability Statement   [ top ]

Table 1: Bluetooth LE RF Capabilities
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
LE Transmitter (Non-connectable, Broadcaster)  [2], 3   C.1      
LE Receiver (Non-connectable, Observer)  [2], 4   C.1      
LE Transceiver (Connectable, Peripheral/Central)  [2], 3, 4   C.1      
C.1: At least one of the capabilities shall be supported

Table 2: Bluetooth LE Test Interface Capabilities
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
HCI Test Interface  [3], 2   C.1      
UART Test Interface  [3], 3   C.1      
C.1: At least one of the capabilities shall be supported





  4.0 Host Controller Interface  
  Vol 3, Part E  



HCI Conformance Declaration   [ top ]

Table 1: Generic Events
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Command Complete  7.7.14   M      
1a  Support all HCI Commands  7.7   C.1      
Command Status Event  7.7.15   M      
Hardware Error Event  7.7.15   O      
C.1: Mandatory if all HCI commands are supported, otherwise excluded.

Table 1a: Roles
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
LE Controller  1   O.1      
O.1: It is mandatory to support at least one of the defined roles.

Table 2: Device Setup
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Reset Command  7.3.2   M      

Table 3: Controller Flow Control
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
(Intentionally left blank)        
Read Buffer Size Command   7.4.5   O      
LE Read Buffer Size Command  7.8.2   M      

Table 4: Controller Information
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Read Local Version Information Command  7.4.1   M      
Read Local Supported Commands Command  7.4.2   M      
Read Local Supported Features Command  7.4.3   M      
Read BD_ADDR Command  7.4.6   M      
LE Read Local Supported Features Command  7.8.3   M      

Table 5: Controller Configuration
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
13  LE Set Random Address Command  7.8.5   C.1      
14  LE Read White List Size Command  7.8.15   M      
15  LE Add Device to White List Command  7.8.17   M      
16  LE Clear White List Command  7.8.16   M      
17  LE Remove Device From White List Command  7.8.18   M      
C.1: Mandatory if LL 1/1 OR LL 1/3 OR LL 4/3 is supported otherwise Optional

Table 6: Device Discovery
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
15  LE Set Advertise Enable Command  7.8.10   C.4      
16  LE Set Advertising Parameters Command  7.8.6   C.4      
17  LE Set Scan Response Data Command  7.8.9   C.5      
18  LE Set Advertising Data Command  7.8.8   C.7      
19  LE Advertising Report Event  7.7.65.2   C.6      
20  LE Set Scan Enable Command  7.8.12   C.6      
21  LE Set Scan Parameters Command  7.8.11   C.6      
22  LE Read Advertising Channel TX Power Command  7.8.7   C.4      
C.4: Mandatory if LL 1/1 is supported otherwise Optional
C.5: Mandatory if (LL 3/2 OR LL 3/5) is supported otherwise Optional
C.6: Mandatory if LL 1/2 is supported otherwise Optional
C.7 Mandatory if LL 3/3 is supported otherwise Optional

Table 7: Connection Setup
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Disconnect Command  7.1.6   C.2      
23  LE Create Connection Command  7.8.13   C.1      
24  LE Create Connection Cancel Command  7.8.14   C.1      
25  LE Connection Complete Event  7.7.65.1   C.2      
26  Disconnection Complete Event  7.7.5   C.2      
27  LE Connection Update Command  7.8.19   C.1      
28  LE Connection Update Complete Event  7.7.65.3   C.2      
C.1: Mandatory if (LL 3/3 is supported otherwise Optional
C.2 Mandatory if (LL 3/4 OR LL 3/5) is supported otherwise Optional

Table 8: Remote Information
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Read Remote Version Information Command  7.1.23   C.4      
LE Read Remote Used Features Command  7.8.22   C.3      
LE Read Remote Used Features Complete Event  7.7.65.4   C.3      
Read Remote Version Information Complete Event  7.7.12   C.4      
C.3: Mandatory if LL 1/5 is supported otherwise Optional
C.4: Mandatory if LL 1/4 OR LL1/5 is supported otherwise Optional

Table 13: Physical Links
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
(Intentionally left blank)        
LE Set Host Channel Classification Command  7.8.19   C.5      
C.5 Mandatory if (LL 1/5) is supported otherwise Optional

Table 14: Host Flow Control
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Host Buffer Size Command  7.3.39   O      
Set Event Mask Command  7.3.1   M      
Set Controller To Host Flow Control Command  7.3.38   O      
Host Number Of Completed Packets Command  7.3.40   O      
12  Number of Completed Packets Event  7.7.26   C.1      
13  Data Buffer Overflow Event  7.7.26   O      
14  LE Set Event Mask Command  7.8.1   M      
15  Read LE Host Support Command  7.3.38   C.2      
16  Write LE Host Support Command  7.3.39   C.2      
C.1: Mandatory if (LL 1/4 OR LL 1/5) is supported otherwise Optional
C.2 Mandatory if 1a/1 is supported, otherwise excluded

Table 15: Link Information
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
Read Transmit Power Level Command  7.3.35   C.4      
Read RSSI Command  7.5.4   C.4      
LE Read Channel Map Command   7.8.20   C.4      
C.4: Mandatory if (LL 1/4 OR LL 1/5) is supported, otherwise Optional

Table 16: Authentication and Encryption
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
32  LE Encrypt Command  7.8.22   C.10      
33  LE Rand Command  7.8.23   C.10      
34  LE Long Term Key Requested Reply Command   7.8.25   C.10      
35  LE Start Encryption Command  7.8.24   C.10      
36  LE Long Term Key Requested Event  7.7.65.5   C.10      
37  Encryption Change Event  7.7.8   C.10      
38  Encryption Key Refresh Complete Event  7.7.39   C.10      
39  LE Long Term Key Requested Negative Reply Command  7.8.26   C.10      
C.10 Mandatory if LL 9/1 is supported otherwise Optional

Table 17: Testing
 Item   Capability  System Spec
 Reference
 Status  Support
[Yes] or [No]
LE Receiver Test Command  7.8.28   C.2      
LE Transmitter Test Command  7.8.29   C.3      
LE Test End Command  7.8.30   M      
C.2: Mandatory if LL 1/2 OR LL 1/3 OR 3/2 OR 3/4 OR 3/5 is supported otherwise Optional
C.3: Mandatory if LL 1/1 OR LL 1/3 OR LL 4/3 is supported otherwise Optional